Circle Segment Area from Radius and Angle (Degrees): 5 units Radius; 45 deg Central Angle (Degrees)
Specific conversion page with reference context, calculator, and nearby values.
On this page
5 units Radius; 45 deg Central Angle (Degrees) converts to
0.978642 sq units
Use this as a quick reference for Circle Segment Area from Radius and Angle (Degrees).
Value Details
Input: 5 units Radius; 45 deg Central Angle (Degrees)
Output: 0.978642 sq units
Browse all reference values for Circle Segment Area from Radius and Angle (Degrees)
Circle Segment Area from Radius and Angle (Degrees)
Calculate circle segment area from radius and central angle in degrees.
Calculated Result
—
Nearby Reference Values
| Scenario | Segment Area |
|---|---|
| 2 units Radius; 330 deg Central Angle (Degrees) | 12.519173 sq units |
| 2 units Radius; 360 deg Central Angle (Degrees) | 12.566371 sq units |
| 5 units Radius; 0 deg Central Angle (Degrees) | 0 sq units |
| 5 units Radius; 15 deg Central Angle (Degrees) | 0.037254 sq units |
| 5 units Radius; 30 deg Central Angle (Degrees) | 0.294985 sq units |
| 5 units Radius; 45 deg Central Angle (Degrees) | 0.978642 sq units |
| 5 units Radius; 60 deg Central Angle (Degrees) | 2.264652 sq units |
| 5 units Radius; 90 deg Central Angle (Degrees) | 7.134954 sq units |
| 5 units Radius; 120 deg Central Angle (Degrees) | 15.354621 sq units |
| 5 units Radius; 150 deg Central Angle (Degrees) | 26.474923 sq units |
| 5 units Radius; 180 deg Central Angle (Degrees) | 39.269908 sq units |
Frequently Asked Questions
Common questions about Circle Segment Area from Radius and Angle (Degrees), formulas, and expected usage.
What does the Circle Segment Area from Radius and Angle (Degrees) calculator do?
It helps with estimating areas of circular segments in geometry, fabrication, and fluid level approximations.
What formula does the Circle Segment Area from Radius and Angle (Degrees) calculator use?
Segment area = (r²/2) × (θ - sin θ), with θ in radians.
What inputs are valid?
Radius must be non-negative and angle is limited to 0-360°.
When would I use this?
estimating areas of circular segments in geometry, fabrication, and fluid level approximations
Methodology and Review
This page is generated from the same conversion definition used by the main calculator page, which keeps the calculator, reference table rows, and FAQ schema aligned.
Reviewer and update metadata are shown above and included in structured data. See our editorial policy, review process, and corrections policy.
Use this page as a fast lookup reference, then confirm final project values using applicable standards and manufacturer documentation.