Sector Perimeter from Radius and Angle (Degrees): 5 units Radius; 360 deg Central Angle (Degrees)
Specific conversion page with reference context, calculator, and nearby values.
On this page
5 units Radius; 360 deg Central Angle (Degrees) converts to
41.415927 units
Use this as a quick reference for Sector Perimeter from Radius and Angle (Degrees).
Value Details
Input: 5 units Radius; 360 deg Central Angle (Degrees)
Output: 41.415927 units
Browse all reference values for Sector Perimeter from Radius and Angle (Degrees)
Sector Perimeter from Radius and Angle (Degrees)
Calculate sector perimeter from radius and central angle in degrees.
Calculated Result
—
Nearby Reference Values
| Scenario | Sector Perimeter |
|---|---|
| 5 units Radius; 210 deg Central Angle (Degrees) | 28.325957 units |
| 5 units Radius; 240 deg Central Angle (Degrees) | 30.943951 units |
| 5 units Radius; 270 deg Central Angle (Degrees) | 33.561945 units |
| 5 units Radius; 300 deg Central Angle (Degrees) | 36.179939 units |
| 5 units Radius; 330 deg Central Angle (Degrees) | 38.797933 units |
| 5 units Radius; 360 deg Central Angle (Degrees) | 41.415927 units |
| 10 units Radius; 0 deg Central Angle (Degrees) | 20 units |
| 10 units Radius; 15 deg Central Angle (Degrees) | 22.617994 units |
| 10 units Radius; 30 deg Central Angle (Degrees) | 25.235988 units |
| 10 units Radius; 45 deg Central Angle (Degrees) | 27.853982 units |
| 10 units Radius; 60 deg Central Angle (Degrees) | 30.471976 units |
Frequently Asked Questions
Common questions about Sector Perimeter from Radius and Angle (Degrees), formulas, and expected usage.
What does the Sector Perimeter from Radius and Angle (Degrees) calculator do?
It helps with estimating boundary length around pie-slice shapes and circular cutouts.
What formula does the Sector Perimeter from Radius and Angle (Degrees) calculator use?
Sector perimeter = 2r + arc length, and arc length = πrθ/180 for degrees.
What inputs are valid?
Radius must be non-negative and central angle is limited to 0-360°.
When would I use this?
estimating boundary length around pie-slice shapes and circular cutouts
Methodology and Review
This page is generated from the same conversion definition used by the main calculator page, which keeps the calculator, reference table rows, and FAQ schema aligned.
Reviewer and update metadata are shown above and included in structured data. See our editorial policy, review process, and corrections policy.
Use this page as a fast lookup reference, then confirm final project values using applicable standards and manufacturer documentation.