Pipe Flow Rate Calculator: 4 in pipe at 8 ft/s
Specific conversion page with reference context, calculator, and nearby values.
On this page
4 in pipe at 8 ft/s converts to
313.34 gpm
Use this as a quick reference for Pipe Flow Rate Calculator.
Value Details
Input: 4 in pipe at 8 ft/s
Output: 313.34 gpm
Browse all reference values for Pipe Flow Rate Calculator
velocityFtS: 8 | flowCfs: 0.6981 | flowLpm: 1186.13 | areaFt2: 0.08727
Pipe Flow Rate Calculator
Estimate flow from pipe inside diameter and velocity.
Estimated Flow
—
Nearby Reference Values
| Scenario | Flow (gpm) | Flow (cfs) | Flow (L/min) |
|---|---|---|---|
| 4 in pipe at 2 ft/s | 78.34 gpm | 0.1745 | 296.5 |
| 4 in pipe at 3 ft/s | 117.5 gpm | 0.2618 | 444.8 |
| 4 in pipe at 4 ft/s | 156.67 gpm | 0.3491 | 593.1 |
| 4 in pipe at 5 ft/s | 195.84 gpm | 0.4363 | 741.3 |
| 4 in pipe at 6 ft/s | 235.01 gpm | 0.5236 | 889.6 |
| 4 in pipe at 8 ft/s | 313.34 gpm | 0.6981 | 1,186.1 |
Frequently Asked Questions
Common questions about Pipe Flow Rate Calculator, formulas, and expected usage.
What formula is used for pipe flow rate?
Flow is calculated as Q = A × v, where A is pipe cross-sectional area and v is flow velocity.
How do you convert cfs to gpm?
Multiply cubic feet per second by 448.831 to get gallons per minute.
Can I use nominal pipe size as inside diameter?
For better accuracy, use actual inside diameter. Nominal size and wall thickness vary by material and schedule.
What velocity range is typical in plumbing systems?
Many domestic systems target moderate velocities to limit noise and pressure loss, often around 2 to 8 ft/s depending on application.
Methodology and Review
This page is generated from the same conversion definition used by the main calculator page, which keeps the calculator, reference table rows, and FAQ schema aligned.
Reviewer and update metadata are shown above and included in structured data. See our editorial policy, review process, and corrections policy.
Use this page as a fast lookup reference, then confirm final project values using applicable standards and manufacturer documentation.