Dowel Joint Sizing Calculator: 1.25 in stock, 5.5 in joint, Medium Duty
Specific conversion page with reference context, calculator, and nearby values.
On this page
1.25 in stock, 5.5 in joint, Medium Duty converts to
4 dowel(s) at 0.375 in
Use this as a quick reference for Dowel Joint Sizing Calculator.
Value Details
Input: 1.25 in stock, 5.5 in joint, Medium Duty
Output: 4 dowel(s) at 0.375 in
Browse all reference values for Dowel Joint Sizing Calculator
loadClass: Medium Duty | jointWidthIn: 5.5 | dowelCount: 4 | embedmentPerSideIn: 0.75
Dowel Joint Sizing Calculator
Estimate dowel layout from material thickness, joint width, and expected load level.
Suggested Dowel Layout
—
Nearby Reference Values
| Joint Scenario | Recommendation | Embedment / Side (in) |
|---|---|---|
| 1.25 in stock, 2.5 in joint, Heavy Duty | 1 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 3.5 in joint, Light Duty | 3 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 3.5 in joint, Medium Duty | 2 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 3.5 in joint, Heavy Duty | 2 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 5.5 in joint, Light Duty | 5 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 5.5 in joint, Medium Duty | 4 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 5.5 in joint, Heavy Duty | 4 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 7.25 in joint, Light Duty | 7 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 7.25 in joint, Medium Duty | 6 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 7.25 in joint, Heavy Duty | 5 dowel(s) at 0.375 in | 0.75 |
| 1.25 in stock, 9.25 in joint, Light Duty | 9 dowel(s) at 0.375 in | 0.75 |
Frequently Asked Questions
Common questions about Dowel Joint Sizing Calculator, formulas, and expected usage.
How is dowel diameter selected?
This calculator starts with the common rule of thumb of about one-third of stock thickness, then snaps to a standard dowel size.
How is the dowel count estimated?
Count is estimated from available joint width after edge margins and a spacing factor that changes with load class.
What embedment depth should I target?
A practical starting point is around two dowel diameters of embedment into each side of the joint.
Is this enough for structural design?
Use this for shop planning; critical joints should still be verified with material tests, manufacturer data, or engineering design checks.
Methodology and Review
This page is generated from the same conversion definition used by the main calculator page, which keeps the calculator, reference table rows, and FAQ schema aligned.
Reviewer and update metadata are shown above and included in structured data. See our editorial policy, review process, and corrections policy.
Use this page as a fast lookup reference, then confirm final project values using applicable standards and manufacturer documentation.